In nearly all situations, most individuals spend quite a lot of money buying their forklift. Hence, it is extremely important to take good care of it in order to protect your investment well into the long run. It is a great idea to know the procedures which are carried out in the maintenance and care of this piece of equipment.
By starting up the forklift and listening carefully how it runs is one of the best ways to tell how good the engine is performing. Like for example, if there are any misses or knocks, the machinery is faulty and this should raise several issues. Additionally listen closely for any squealing noise that come from the belts as these noises would provide you with a lot of information.
When performing maintenance, some of the main components you will need to pay attention to consist of the safety warning devices, horn, the overhead guard, the lights and the gauges. Any faulty components or burnt out light bulbs must be replaced as soon as they are noticed. It is also essential to inspect the wiring.
The battery compartment terminals must be cleaned after the above parts have been checked carefully. If the terminals are not clean, be sure to clean them properly. Each and every battery cell needs to be inspected so as to make certain that the fill level is topped up to the regulated amount.
An oil change is the next step to drain all the oil out of the equipment and then change the filters. The transmission filter, fuel filters and the hydraulic filter have to be replaced regularly. Before fitting them, be sure to write the date on the new filters by using a permanent marker to be able to keep track.
After the oil change is finished and the filters have been replaced, a visual inspection of the drive axle has to be done. If there is a grease fitting on the axle make certain to apply some grease. Inspect the belts on the engine for any cracks or frays. If you find any, fix the issue accordingly. Afterwards, check each and every other part of the equipment like the wheels. If any type of fault or issue is detected, be certain to deal with it immediately so as to make sure the equipment is running at its safest and optimum levels.